Updated on 17/11/26 by Ben_OVO
Your smart meters are designed to send us your meter readings automatically. You can check the readings we’ve received by heading to the ‘meter readings’ page of the OVO app (download for Android or iOS). If you need to take manual readings check the instructions for your meter type below.
There’s a slight difference between the the S1 meters we used to install. You’ll need to press different buttons to get your readings depending on whether you have a single rate meter, or a dual rate Economy 7 meter.
If you’re on a single rate plan press ‘9’ on the keypad. The reading will be displayed alongside ‘IMP KWH’.
To take dual (day/night) readings for Secure Liberty 110 or 112 S1 smart meters, press 9 on the meter’s keypad. If you’ve got a Secure Liberty 100 S1 smart meter, press 6 to confirm the Day and Night meter readings.
| | Aclara (Elec) / Flonidan (Gas) | Elster (Elec) / Honeywell (Gas) |
| Reading the meter | - Elec: Press A three times until TOU Rate 1 appears.
- Gas: Press C to wake up, then C to access the menu. Use B to scroll and C to select the reading option.
| - Elec: Press the top button once or twice
- Gas: Press the circle button once or twice
|
If you’re worried that your smart meter has lost communication you can help diagnose this by following the smart meter health check for your meter type below, then reaching out to the Support team.
Got another model of smart meter? We might have you covered in the guides below: