Skip to main content
Rank 2
Aug 1, 2018 12:00 PM UTC
Solved

How do I take a reading from a Secure SMETS 1 smart meter?

I need to give my current meter readings to my new supplier but I can appear to find my current meter readings on the Smart meter.


I’ve tried entering “9” but I think this is for a different make.

Any suggestions please?

 

Ben_OVO
Ben_OVOBest Answer
Community Manager
Nov 5, 2026 3:53 PM UTC

To take a reading from your Secure 'Liberty' S1 smart meter, you’ll need to look on the actual meter. This information is not displayed on the In Home Display (IHD).

 

There’s differences between the the S1 meters we used to install. To take dual (day/night) readings for Secure Liberty 110 or 112 S1 smart meters (which are designed to work best with storage heaters), press 9 on the meter’s keypad. If you’ve got a Secure Liberty 100 S1 smart meter, press 6 to confirm the day and night meter readings, or press 9 if you’re on a single rate plan.

 

To take a reading from your electric S2 Aclara smart meter, press  A on your electric meter and TOU rate 1 will be the reading. For Economy 7, TOU rate 2 will show the other reading.

 

For the Aclara gas meter press ‘C’ to wake the meter up, then ‘C’ to access the menu. Use ‘B’ to scroll and ‘C’ to select the reading option.

 

We should be able to communicate with your meters to get readings remotely. If you think there’s communication issues with your S1 smart meter we’d recommend carrying a smart meter health check and contacting our Support Team with the results.
 

You can find more smart meter guides in our Forum Library section here.

Powered by the Sun

21 replies

NinjaGeek
Rank 12
Rank 12
Aug 1, 2018 2:12 PM UTC
I am guessing this is where you are pressing 9 and nothing is happening?
Renewable energy + EV enthusiast
LarchtreeAuthor
Rank 2
Aug 1, 2018 2:14 PM UTC
No I’ve not tried this, just the home internal display unit, so will give this a try.
NinjaGeek
Rank 12
Rank 12
Aug 1, 2018 2:15 PM UTC
Yes I believe this is what they mean.
Renewable energy + EV enthusiast
LarchtreeAuthor
Rank 2
Aug 1, 2018 2:19 PM UTC
Tried pressing 9 on the outside units and it has worked.
Sorry I assumed that was the point of the smart meter being indoors.
Thanks for your help.
NinjaGeek
Rank 12
Rank 12
Aug 1, 2018 2:37 PM UTC
No worries. I am happy to help 🙂

Enjoy the rest of your weekend.
Renewable energy + EV enthusiast
SianiAnni
Rank 4
Rank 4
Aug 1, 2018 4:25 PM UTC
Hi @Larchtree, the photo you took was of your In Home Display, I don't think you can get meter readings from that, unfortunately. The actual smart meters are the bits of kit in your meter cupboard or attached to an outside wall, connected to the mains gas or electricity supply.
SianiAnni
Newcomer
Oct 14, 2018 7:53 AM UTC
I had a smart meter installed a few months ago however they did not provide me with a display unit as they were out of stock. How do I take meter readings? There’s so much informations popping up on the screen. I have since then switched to edf and I’m struggling to provide them with readings
Nancy_OVO
Retired Moderator
Retired Moderator
Oct 16, 2018 1:15 PM UTC
Hey @Lauramac16 - I've moved your comment over to this thread where you should be able to find the info that you need!
Your guiding light(bulb)
Newcomer
Jul 27, 2019 8:26 AM UTC
I have the secure in home display how do you take your meter readings from it as I need to send them off today?
Amy_OVO
Retired Moderator
Retired Moderator
Jul 29, 2019 3:55 PM UTC
Welcome to the forum, @Nathane89, check out @ITGeek123's best answer. 😀
OVO-Joyed to help!