Why solis cloud not showing power flow on website and app as well?

Hi @najmsaqib , you’ll need to explain further. All the image shows is no generation and no battery charging. 

I setup datalogger successfully now showing the simple generated power, daily yield etc byt there is no power flow showing on cloud.

My inveter model is S5-GR3P10K.
Only Datalogger wifi device is attached with it.

Its just a sample image taken from online, I want to add this power flow in my app or website inverter details page.

There’s a Solis Cloud manual here and a video which might help

Hopefully the links above help, if not, please pop back @najmsaqib and I’ll tag some of our community members with Solis Cloud 🙂

@BPLightlog & @Emmanuelle_OVO 
Thanks for your answering.

The above video & manual not helping me to add power flow chart in my cloud.

Hey @najmsaqib,

Does this walkthrough here help? 

 @edsashley  @pumpkin @chrishart @Mbu1982 @magstl got any advice for our Community Member?

@Emmanuelle_OVO 

After setting internal emp mode to consumption is see that graph in my Solis cloud app.

But I have a question it's showing all power in load, while the home load is less and why it's not showing that the export power?

It would be helpful to keep your question in one place and not all over the forum. If someone can help, they will reply although this is a UK forum and therefore might have different technical requirements to those in Pakistan. 
 

Unable to see power flow on solis app. Could someone please advise how to sort this?

Need a bit more info @Goodmaa67   

What is your set up? Which inverter? Are there batteries? Have you looked at the app and cloud (web) system?

Sorry meant to add No batteries. I have looked at the App and checked I have the most recent version of solis cloud.
 

regards

Alan Goodman

Ok - a few clues then. Looks like a 4G mini

Manual

From what I understand, they use Solis Cloud for monitoring. There are a few videos to walk through set up

Earlier in this thread, a user reported that they had to set up the internal emp mode to consumption to view flow. 

I’m using solis inverter of s5 series and on my green meter it is showing exported units but my solis cloud app doesn’t show the graph!

I’ve seen other threads but nothing works.

It seems to be to do with how your inverter is set up and not knowing that, it’s not possible to suggest a solution. 
Also, as with others, you seem to be based outside the UK and so there may be technical differences in the specification. 
Sorry 

Hi @najmsaqib how did you turn emp internal consumption on? I am having the same issue as you. Can you share a link?

Hey @Joshv 

Welcome to the Forum!

I hope one of our community members are able to help answer your question based on their own experiences, but we do have a lot of topics related to Solis, I’ve linked below to just a few of these but you can find lots more by searching ‘solis’ on the home page of the Forum:

Solis also have a really handy contact page if you wanted to reach out to them directly too.🙂