What is a vend code and pin code for my Pipit In-Home Display (IHD)?

So what about the PIN number I require??

So what about the PIN number I require??

Well @Pugin25 that PIN number is only used by an engineer to un-link the IHD from the meters. You won't need to enter a PIN number - leaving the IHD for a minute or so will get you off that screen and back to the default screen.

Tim

@Tim_OVO I also need a PIN. We had a smart gas meter installed but the engineer has not linked it to our IHD. The electric meter had been fitted previously and was already linked.

@Tim_OVO I also need a PIN. We had a smart gas meter installed but the engineer has not linked it to our IHD. The electric meter had been fitted previously and was already linked.

Hi @matthewwoods

No need for a PIN number. This tells me the IHD is already linked up, at least with one of your meters. To be sure, I'd suggest you ring our Care team. Whilst you're on the phone, they can link up your IHD with your gas meter, or be able to confirm it's already linked: https://www.ovoenergy.com/ovo-answers#contactnumbers.

Tim

I was informed a vend code is the 20 digit number on your receipt once you top up on pay as you go customer ... so keep hold of every reciept until you check your top up has been accepted

I was informed a vend code is the 20 digit number on your receipt once you top up on pay as you go customer ... so keep hold of every reciept until you check your top up has been accepted

That’s right. If the top up hasn’t automatically gone on then you’ll need the vend code to manually add the credit to your meters. For more information, check out https://www.ovoenergy.com/ovo-answers/topics/payg/smart-payg/how-do-i-add-credit-manually-on-a-smart-meter.html.

Lucy

Gas is not working. I pay monthly so I am in credit. It says vent then incomplete. Something about a code.

Hi @Illsley1981,

If your gas meter/supply goes off suddenly, we'd always recommend calling the team as soon as you can on 0330 303 5063. They're available 8am to 6pm on weekdays.

If you have a smart gas meter in credit mode, it's unlikely that the meter would switch itself off. As long as the light on the meter is on, this means there's an incoming supply. There could be an outage in the area which would cause this to go off. You can check for outages here.

If it's a single appliance that you've noticed not working, be sue to check other appliances like boiler/hob ring/oven etc. Any faults within the property would need to be checked by a Gas Safe Engineer.

Cheers

So here begs the question Why do OVO make absolutely no reference to the Vend code in their on line web site smart meter tutorials. Is there something sinister about it?