Skip to main content
Rank 2
Origjoe101
Rank 2
October 4, 2024
Solved

Grid settings for Bluesun BSE6KL1 hybrid solar inverter

  • October 4, 2024
  • 11 replies
  • 768 views

I have a bluesun BSE6KL1 hybrid solar inverter  (rebadged Megarevo R6KL) and Solarman smart App. I am failing to set the following parameters on either device:

Grid Ctrl:

P%_Feed

P_Feed

P%_Back

P_Back

 

As soon as I switch to grid the inverter tries to send PV W back to the grid. As I dont have a feedback/two way meter it causes a major fault/trip. Currently P%_Feed is 100% and I cant change it.

I can see the setting on the inverter menu but it wont allow me to change it

Best answer by Origjoe101

BlueSun did contact me and the solution was simple, where their manual shows the default password to be “0000” to enter the settings menu, it is actually “5432”

Doubt the fact because I’m in Zambia it affects the password

Hope this helps anyone in the same situation

11 replies

BPLightlog
Super User
BPLightlogSuper User
Super User
October 4, 2024

There’s an installation guide here and a few downloads available here 

Another thread here 

Another good resource is the DIY Solar forum - they have more users who may be able to help

Bring me Sunshine ~ E&E {Solar PV, Battery Storage, Hybrid EV, ASHP and Home Assistant automation}
StaceyNicole
Newcomer
StaceyNicole
Newcomer
October 4, 2024

Hey there! I've been working with solar inverters for a while now, and I think I might be able to help you with that BSE6KL1.

To better understand the issue, could you please elaborate a bit more on:

  • Your grid connection: Is it a single-phase or three-phase system?
  • Local regulations: Are there any specific grid-tie regulations in your area that you need to comply with?
  • Inverter firmware: Have you tried updating the inverter's firmware to the latest version? Sometimes, a firmware update can resolve strange behaviors.

Also, have you tried reaching out to Bluesun or Megarevo's technical support? They might have specific guidelines or troubleshooting steps for your model. 🟩

Rank 2
Origjoe101Author
Rank 2
October 4, 2024

There’s an installation guide here and a few downloads available here 

Another thread here 

Another good resource is the DIY Solar forum - they have more users who may be able to help

Hi thanks

First guide is solar panel related and second is a data sheet. I will try other forum. Tx 

Rank 2
Origjoe101Author
Rank 2
October 4, 2024

Hey there! I've been working with solar inverters for a while now, and I think I might be able to help you with that BSE6KL1.

To better understand the issue, could you please elaborate a bit more on:

  • Your grid connection: Is it a single-phase or three-phase system?
  • Local regulations: Are there any specific grid-tie regulations in your area that you need to comply with?
  • Inverter firmware: Have you tried updating the inverter's firmware to the latest version? Sometimes, a firmware update can resolve strange behaviors.

Also, have you tried reaching out to Bluesun or Megarevo's technical support? They might have specific guidelines or troubleshooting steps for your model. 🟩

Hi

Single-phase

No regulations as such, but we can’t supply to the grid as yet (Zambia)

I can’t find a prompt on the App or the inverter to update the firmware

I have contacted their support, but still waiting

    BPLightlog
    Super User
    BPLightlogSuper User
    Super User
    October 4, 2024

    Manual link updated 

    https://www.kolbe.de/mediafiles/handbuecher/Photovoltaikmodule/HKW10_IM_1.pdf

    Bring me Sunshine ~ E&E {Solar PV, Battery Storage, Hybrid EV, ASHP and Home Assistant automation}
    Rank 2
    Origjoe101Author
    Rank 2
    October 4, 2024

    Manual link updated 

    https://www.kolbe.de/mediafiles/handbuecher/Photovoltaikmodule/HKW10_IM_1.pdf

    Thanks for the above. That inverter has a different interface to the one I have, hence the

     

    Rank 2
    Origjoe101Author
    Rank 2
    October 4, 2024

    Manual link updated 

    https://www.kolbe.de/mediafiles/handbuecher/Photovoltaikmodule/HKW10_IM_1.pdf

    Thanks for the above. That inverter has a different interface to the one I have, hence the

     

    I can see the problem on the menu (P%_Feed = 100%) but I cant access the menu to change the field to 0%

    BPLightlog
    Super User
    BPLightlogSuper User
    Super User
    October 4, 2024

    Yes - here’s where this site is not ideal for you. Being a UK based forum, we don’t have a full list of other territory specifications, rules & regulations etc. 

    One user was able to get a firmware update but the other wider based forums might help more

    Bring me Sunshine ~ E&E {Solar PV, Battery Storage, Hybrid EV, ASHP and Home Assistant automation}
      Abby_OVO
      Community Manager
      Abby_OVO
      Community Manager
      October 7, 2024

      Hey @Origjoe101 

       

      Sorry to hear about the trouble you’re having. 

       

      As BPLightlog has mentioned, we’re a UK based forum so it can be hard to find the right answer sometimes for elsewhere.

       

      It may be worth reaching out to Bluesun directly for support. It looks like they have lots of contact options so hopefully you can get some more help with them.

      Currently Playing: She's Electric
      Rank 2
      Origjoe101AuthorBest Answer
      Rank 2
      October 8, 2024

      BlueSun did contact me and the solution was simple, where their manual shows the default password to be “0000” to enter the settings menu, it is actually “5432”

      Doubt the fact because I’m in Zambia it affects the password

      Hope this helps anyone in the same situation

        Show more replies
        Terms & ConditionsAccessibility statement

        OVO Energy Ltd, Floor 5, Crescent, Temple Back, Redcliffe, BS1 6EZ, (Company no. 06890795) registered in England and Wales.

        OVO (S) Gas Limited is registered in England and Wales (Company No. 02716495) at Floor 5, Crescent, Temple Back, Redcliffe, BS1 6EZ.

        OVO (S) Gas Limited is part of OVO Group Ltd