Recently tried installing Tado v3+ wireless starter kit but left me with no power to boiler
worked out the cable asked to replace in instructions was power to boiler so put both Tado and boiler L and N cables in the relivant ports in boiler and had power
however when it came to test, boiler didn’t fire.
was previously using Salus RT520 thermostat, unsure whether this is wired or wireless to boiler
tried the Tado support with no luck, they didn’t seem to understand.
As Tado Support are the experts, we don’t have guides or experts on these types of installations here.
I did check out the Tado Support page which has access to their Support Chat, and a whole selection of guides including a section on ‘installations’. https://support.tado.com/en/
As Tado Support are the experts, we don’t have guides or experts on these types of installations here.
I did check out the Tado Support page which has access to their Support Chat, and a whole selection of guides including a section on ‘installations’. https://support.tado.com/en/
It might be worth double checking on the install notes @cwalker1995. Mine is a Bosch Smart Controller which is wireless (links directly to the boiler). Obviously, that type of link would need a connection module on your boiler
I'm afraid my experience is with the wired smart thermostat. My Ecotec 831 Plus boiler works in either relay or eBus mode depending on the wiring. I've tried both. Following the wiring instructions correctly is, of course, essential to success.
Unfortunately I can't advise on alternate boiler and thermostat types.
We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.