Skip to main content
Rank 1
Nov 19, 2026 10:52 AM UTC
Question

Ficticious usage ? - why should i pay for it?

We wanted to install a smart meter but were told our old meter has no “neutral block”. When this was finally addressed by national grid our OVO recorded usage doubled from 23 to 46 kWh. This was before the smart meter was installed , so the only work was by National grid and nothing else changed in the household.

Any ideas why this has occurred ? it is clearly not real usage !

1 reply

Nukecad
Super User
Super User
Nov 19, 2026 11:41 AM UTC

As you say that this was before a smart meter was installed then those daily figures will be estimates just used as an indication.
They can’t be actual usage figures unless there is a smart meter sending readings daily. (Or you are sending in daily readings yourself to mimic a smart meter).

Why the estimates suddenly jumped up like that is harder to say.
There could be various reasons, but as your DNO (National Grid) had done some work I suspect that something changed your Future Assessed Consumption figure to a higher one, thus upping the estimates.
We have seen that happen before when something has changed on the national records. Even simply having a meter replaced with a new one can sometimes cause it to happen.

 

What really matters is what your bill for your October-November billing period says for the opening and closing readings - and even those may be estimates unless you have sent in readings.

For example this is part of a bill from before I had a working smart meter, note that the opening and closing readings are both estimates. (even though I was sending readings on the 23rd of each month, the last day of my billing period.*
 

 

*I later found out how to avoid those estimated readings entirely - the trick is to send a meter reading on the day after the end of your billing period. That reading is then assigned to the end of the last day of the period, thus eliminating the estimated readings.


Of course once you have a smart meter sending readings then you no longer have to bother with sending readings.

 

Out of beer error >>>> Recovering memory.