Charging two different EVs with Ohme charger

Thanks for the quick reply. That's good news but will the charger know the charge state of the second car that gets plugged in, or will it default back to the Audi and confuse the charging routine?

It won’t know that it’s another EV, but that will not affect Charging which will function normally anyway.

OK, thanks 👍

Hi ​@Blastoise186 ,

I use an Indra rather than an Ohme, so this might not be relevant, but I’ve always assumed I should change the vehicle details in the charger’s app if the 2 cars have significantly different capacity batteries.

My logic is that, as it only allows me to set a ‘ready by’ time, it must need to know how many kWh it’s likely to need to deliver?

You can do that if you want, or you can just leave it be. Personally, I’d say leave it be unless the capacities are massively different TBH because the EV will stop taking charge when it’s done anyway.

If you have any more questions ​@MikeyB & ​@Phil Smith we have a topic hub which might be really helpful to you:

• Charge Anytime - Topic Hub & How to get in touch F.A.Q.

Is there any update on the prospect if adding two chargers to the same charge anytime account?

Hi ​@BlueGoat ,

AFAIK you can only use ONE Charger at a time. It’s unlikely to change anytime soon. But you can charge ANY EV you want with that Charger and still get the Charge Anytime rates.