After the constant nagging from OVO to install smart meters, I finally gave in about a year ago. The installer came and refused to fit it, because they were unable to climb a ladder (the meter box is above the front door).
We share a common entrance wirth next door and their smart meter (fitted by Utility Warehouse) is next to ours in the same place.
I am now not able to request a SMART meter. We are looking to rent our property out soon so it would be very useful (I don’t think the tenants will want to climb a ladder to read the meter!)
The gas meter is outside the front door and easy to access.
Thanks for your post, and a warm welcome to the OVO Forum! 😁
If the meter is at height, then the Advisor who books the job must clearly note this in the job booking. The reason you won’t be able to book an appointment at the moment is because of the previous aborted attempt.
My advice here is to contact our Support Team, as they will need to remove the appointment blocker so that this can be re-booked. When you do re-book the job make sure to tell the advisor that the meter is positioned at height, so that the engineer can bring the necessary kit. You’ll need to let them know exactly how high the meter is off the ground. Please note, if the meter is above six feet off the ground then we may not be able to do the job, in which case your District Network Operator will need to move the meter.
You can find some useful information on all of this in the previous topic below:
Well, after an online chat, Field Force are coming next week to install the meters, apparently bringing all necessary equipment for what they call “an equipment job”.
I gave a link to this forum discussion which saved me having to explain it all, so thanks to those who contributed.
Fingers crossed for next week, I will report back.
Update: We are now the proud owners of an electricity smart meter. A hi-tech step ladder was employed by the installer…
Unfortunately, they could not fit the gas meter, because apparently there is an issue with a bracket on the gas pipe. We asked our local gas engineer about it, and he said the supplier would need to sort it out. So back to OVO I guess..
That’s great news about the electricity meter - thanks for letting us know. I’m wondering whether @Lukepeniket_OVO might be able to get in touch with you about the gas meter - it might be that our engineers need certain kit to get it installed, however it may be the Grid that has to come out first before the smart meter can be fitted. Hopefully it's not anything too technical.
The meter is not properly supported by the bracket. It looks like a support leg has been deliberately cut off by someone so as to jiggle it into an awkward place without having to disconnect the meter?
I assume that the meter isn’t sitting on it’s base and may even be just supported by the pipes? Or will be if the bracket corrodes any more. That is unsafe hence the “DO NOT USE” warning sticker.
Even if the meter is sat on it’s bas a new meter may be smaler, the new gas smart meter I has fitted a couple of months ago is 1/3 the sixe of the old one.
We can’t see what the bracket is fixed to either - if it’s actually fixed to anything. It should be secured to the wall in that configuration.
it just needs a new bracket, but as that means unfastening the pipes from the meter then it’s a job for the supplier to do - but I believe that its your responsibility to supply the bracket, New brackets are readily available and not expensive.
The meter is not properly supported by the bracket. I’m not sure if the bracket has just corroded or has been cut away?
I assume that it isn’t sitting on it’s base either and may even be just supported by the pipes? Or will be if the bracket corrodes any more. That is unsafe hence the “DO NOT USE” warning sticker.
We can’t see what the bracket is fixed to either - if it’s actually fixed to anything. It should be secured to the wall in that configuration.
it just needs a new bracket, but as that means unfastening the pipes from the meter then it’s a job for the supplier to do - but I believe that its your responsibility to supply the bracket, New brackets are readily available and not expensive.
ok thanks. So what do I actually have to do now to progress this? Who do I need to call?
Presumably the engineer will have submitted a report about why the gas meter wasn’t changed, particularly if they have also issued that “DO NOT USE” prohibition.
When fitting such a label they should have also provided you with a gas warning notice; which should contain precise details of the unsafe situation.
I am only going off what you have said about the bracket being an issue and that photo - the actual safety issue might be something else.
You might want to wait a day or two for OVO to contact you, or to make sure they have the engineers report before you contact them.
EDIT- I don’t think that you need SGN involved, as long as the meter engineer knows that he will need to fit a new bracket then he should be able to do that - he is taking the old meter off anyway. But as I said you will probably have to buy the new bracket and have it ready to be fitted.
If you do have to buy one then you may want to double check the dimensions between the pipes and from the pipes to the wall, just to make sure the new one is the same.
Update: Ovo are sending another engineer next week to do a “site investigation” and decide what we need to do next. My guess is the defective gas meter bracket may be bonded to the box in some way, so a new wall box may be needed.
Thanks for letting us know. I’m glad to hear that the ball is rolling on this. I’ve reached out to a colleague and have passed your photo on to them, just to check if the site investigation is definitely the best way to go. I’ll get back to you when I’ve heard from them. Just to confirm, was it Customer Services who booked this in for you?
Thanks for letting us know. I’m glad to hear that the ball is rolling on this. I’ve reached out to a colleague and have passed your photo on to them, just to check if the site investigation is definitely the best way to go. I’ll get back to you when I’ve heard from them. Just to confirm, was it Customer Services who booked this in for you?
Cheers 😁
Yes, I phoned up Ovo yesterday and the call agent booked the appointment.
Not a very consistent message between the OVO app and the OVO website!
And yes, I do “mind” sending one manually. That is why I have spent a year fighting to get the d**n thing installed so I don’t have to risk life and limb climbing a ladder over the stairs!
Website still shows the old meter serial number and no reading received. new IHD not working either. Hopefully it will all start working before we move house next month.
I know that is the line they trot out to cover themselves, but seems a bit extreme just to update a few database records. It also means we may be unable to give a final meter reading when we move later this month!
It’s not just updating a few database records on OVO’s side I’m afraid - it’s updating database records across the entire industry and making sure they all agree.
It’s not just updating a few database records on OVO’s side I’m afraid - it’s updating database records across the entire industry and making sure they all agree.
Not as fast a process as I’d like either...
Strange that it has literally started working in the last 10 minutes :-) The Systems admin’s ears must have been burning!
We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.