Skip to main content
Solved

Grants 17KW ASHP electricity running costs extortionately high 4 bed house

  • February 27, 2023
  • 4 replies
  • 240 views

Forum|alt.badge.img

Current average monthly electric bills costing £ 500, question with the current energy prices is this similar to everyone else with the same kind of system ? Is the ASHP pump running efficiently at this kind of prices?  

Best answer by M.isterW

You need to find out if the problem is that your house needs lots of heat or your heat pump is running inefficiently. The way to do that is to get your COP figures (coefficient of performance) from the heat pump? Ideally you want separate COP figures for heating and hot water.

 

If your COP is high then the problem is that your house needs lots of heat. If it's low your heat pump is running inefficiently and you might be able to change some settings to improve it.

View original

4 replies

BPLightlog
Plan Zero Hero
Forum|alt.badge.img+5
  • Plan Zero Hero
  • 2729 replies
  • February 27, 2023

That sounds rather high. What sort of system and set up do you have?


Forum|alt.badge.img
  • Author
  • New Member*
  • 1 reply
  • February 27, 2023

Grant Aerona 17kW R32, 

MonoWave heat pump cylinder 300l, Hive Active Heating and Hot Water Thermostat UK7004202, Grant MagOne Filter, Grant Automatic Domestic Hot Water Boost Kit (timed),Grant Hot Water Priority Relay (2 CH Zones), 30 litre insulated volumiser, Flow meter including fill & flush points.

Underfloor heating throughout the ground floor and radiators upstairs,

Not sure if it makes a difference but the upstairs thermostat can never reach the target temperature its set too. 

 

Currently paying 31.49 per KW, In Jan 2023 says it used 1446.06 KW


M.isterW
Carbon Catcher***
Forum|alt.badge.img+4
  • Carbon Catcher***
  • 410 replies
  • Answer
  • February 27, 2023

You need to find out if the problem is that your house needs lots of heat or your heat pump is running inefficiently. The way to do that is to get your COP figures (coefficient of performance) from the heat pump? Ideally you want separate COP figures for heating and hot water.

 

If your COP is high then the problem is that your house needs lots of heat. If it's low your heat pump is running inefficiently and you might be able to change some settings to improve it.


Forum|alt.badge.img+4
  • Carbon Cutter****
  • 7 replies
  • March 1, 2023

@B7LLY21 That doesn’t sound quite right - we have a similarly sized and styled setup and generally have problems getting downstairs (underfloor heating) to reach temperature because it’s slow to react compared to radiators upstairs (super quick heat).

I too would recommend calculating your COP. When Hive asks for heat upstairs, are all your radiators hot from top to bottom?


Reply


Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings