Skip to main content
Solved

Economy7 - My peak charges are huge!


  • Carbon Cutter****
  • 14 replies

I had 3 new Dimplex storage heaters installed to replace the very old ones. I understood these would be more efficient, but in fact they’re really expensive- often £20 per day to run a 1 bed home.

I’m wondering if I’m using them correctly? 
here’s this months consumption- I thought the idea was to charge overnight, off-peak, and use this stored energy during the day?? 
 

 

Best answer by BPLightlog

Updated on 12/12/24 by Shads_OVO

PollyG wrote:

Yes, you set the times & temp

If you had storage heaters before, you probably understand this but the basic info is -

  1. The ‘output’ setting of your storage heater should be turned off at night; and also when you are out of the room or out of the house.
  2. The ‘boost’ setting can be used to throw out extra warmth. But it uses expensive daytime electricity, so use all the stored heat first by opening the output fully before using boost.

As long as the timers are set correctly, it should all be ok. It’s worth just checking that the meter is reading the right way around and that the readings are what your meters say and not estimated on your bill

View original

6 replies

BPLightlog
Plan Zero Hero
Forum|alt.badge.img+5
  • Plan Zero Hero
  • 2728 replies
  • March 8, 2023

They need to be set up correctly @PollyG . It may be that your timing system is not set correctly or that you have boost enabled during the day. 
Can you tell/show us the set up? Also it’s worth checking that your meter is giving the readings the right way around - you can check this by seeing which register clocks up when you switch things on during day or night hours (peak or off peak hours)

Edit: you seem to have had a time with transposed readings a few months ago. Check the meter readings to see if this has happened again


  • Author
  • Carbon Cutter****
  • 14 replies
  • March 8, 2023

I’m not sure how to check if they’re set up correctly or if boost is on


BPLightlog
Plan Zero Hero
Forum|alt.badge.img+5
  • Plan Zero Hero
  • 2728 replies
  • March 8, 2023
PollyG wrote:

I’m not sure how to check if they’re set up correctly or if boost is on

Are there some controls or timers?


  • Author
  • Carbon Cutter****
  • 14 replies
  • March 8, 2023

Yes, you set the times & temp


BPLightlog
Plan Zero Hero
Forum|alt.badge.img+5
  • Plan Zero Hero
  • 2728 replies
  • Answer
  • March 8, 2023

Updated on 12/12/24 by Shads_OVO

PollyG wrote:

Yes, you set the times & temp

If you had storage heaters before, you probably understand this but the basic info is -

  1. The ‘output’ setting of your storage heater should be turned off at night; and also when you are out of the room or out of the house.
  2. The ‘boost’ setting can be used to throw out extra warmth. But it uses expensive daytime electricity, so use all the stored heat first by opening the output fully before using boost.

As long as the timers are set correctly, it should all be ok. It’s worth just checking that the meter is reading the right way around and that the readings are what your meters say and not estimated on your bill


  • Author
  • Carbon Cutter****
  • 14 replies
  • March 8, 2023

Great thank you


Reply


Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings