Has anyone managed to get an iD3 ver 3:0 to charge on a non smart meter. My car doesn't want to do the handshake to start the charge at anytime. If you have how did you set it up?
Solved
Charge Anytime on VW iD3 ver3:0 with a non smart charger
Best answer by Jeffus
Updated on 21/02/25 by Chris_OVO
My understanding is that you need a smart meter
+2- Plan Zero Hero
- 2561 replies
- Answer
Updated on 21/02/25 by Chris_OVO
My understanding is that you need a smart meter
1 person likes this
Thanks for replying. My understanding is that you need either a smart meter that is listed or a listed EV.
+2- Plan Zero Hero
- 2561 replies
LostAgain wrote:
Thanks for replying. My understanding is that you need either a smart meter that is listed or a listed EV.
You need either an EV Charger that is listed or an EV that is listed.
In both cases you need a smart meter.
Perhaps you are confusing smart meter with EV Charger?
Are you using the OVO Charge Anytime app on your phone to setup the charge?
1 person likes this
It works I now have charge anytime working perfectly on my Rolec non smart charger and my iD3 with version 3.0 software. You just have to make sure that you have no locations or times set up in the we connect id app or car. Also make sure your charger is providing 32 amps from the initiation of the charge. Leave all the smart stuff to the charge anytime app and Bob’s yer uncle!
1 person likes this
Reply
Log in to the OVO Forum
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.